Poweron has introduced PSE series wall-mountable hybrid solar inverters in three models with nominal power of 3.68 kW, 4.6 kW and 5 kW, respectively. All the three devices have a maximum DC-to-AC conversion efficiency of 97.6%, a European efficiency of 97%, and MPPT efficiency of 99.5%. These are compatible with both lead-acid and Li-ion battery.
The maximum DC input voltage is 550 V. Each inverter has two built-in MPPT trackers. The MPPT tracking voltage is 155-500V for 3.68 kW inverter, 188-500V for 4.6 kW device, and 200-500V for 5 kW.
The inverters can work in either grid-tied or off-grid mode.
The inverters are transformerless and feature convection type cooling, DC switch (optional), RS485 standard, external WiFi or GPRS (optional) communication interface. Total harmonic distortion is below 3%. Operating temperature range is -20°C to +60°C.
The inverters measure 523×495 ×191 mm each and weigh 28 kg (3.68 kW model) and 30 kg (4.6 kW and 5 kW models).
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: firstname.lastname@example.org.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.