Jaipur-based Rajasthan Electronics & Instruments Limited (REIL) has invited bids to supply an aggregate 200,000 quantities of multi-crystalline silicon solar cells rated for a peak power output of 4.50W (4-/5-busbar) and 4.60W (5-busbar).
Quantities required are 100,000 of 4.5W (4-/5-busbar) and 4.60W (5-busbar) cells each.
The solar cells should be 156×156 ± 1.0mm or 156.75×156.75 ± 1.0 mm in size, with a cell thickness of 200±20 microns. Further, the front busbar must be at least 0.8 mm wide and the back busbar 1.0 mm. Cells with plasma-enhanced chemical vapor deposition of silicon nitride as anti-reflection coating are preferred.
Only REIL-approved bidders will be considered against this tender. Those not listed as CEL-approved vendors will be required to provide a sample of 140 cells.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.