Central Electronics Ltd has invited bids to supply 3 million multi-crystalline solar cells, including 1.5 million cells rated for a peak output of a minimum of 4.68 watts and another 1.5 million rated for 4.63 Wp.
The solar cells must feature five busbars, with the front busbar having a minimum width of 0.8 ± 0.2 mm and the back busbar 1.5 ± 0.3 mm and aluminum BSF.
The cells should be 156.75 x 156.75 mm ± 0.25 mm or 157 x 157 mm ± 0.25 mm in size, with a cell thickness of 200±20 microns. These must have uniform silicon nitride as an anti-reflection coating.
To be eligible, the vendor should have a minimum of 30 MW/annum multi-crystalline solar cells manufacturing capacity.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: firstname.lastname@example.org.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.